« previous next »
Pages: 1 ... 6 7 [8] 9 10 ... 12   Go Down

Author Topic: SatHawk / Solomend HD PVR 800  (Read 26701 times)

0 Members and 1 Guest are viewing this topic.

Offline ibcus

  • Jr. Member
  • **
  • Posts: 21
Re: SatHawk / Solomend HD PVR 800
« Reply #105 on: July 05, 2010, 06:18:28 PM »
Quote from: hooley
The firmware i got from a different site works i know but it wipes out the cccam on the box, it puts it into sathawk mode. my supplier is not responding to my emails thats why i was asking, i coulnd give a shite about the small fee. i just want to get it sorted

Can you point me in the direction of the firmware that fixes AC3?


EDIT: I found it
Logged

Offline Bullsat

  • Jr. Member
  • **
  • Posts: 9
Re: SatHawk / Solomend HD PVR 800
« Reply #106 on: July 05, 2010, 06:27:41 PM »
You are not allowed to view links. Register or Login HERE!
Logged

Offline ibcus

  • Jr. Member
  • **
  • Posts: 21
Re: SatHawk / Solomend HD PVR 800
« Reply #107 on: July 05, 2010, 06:36:37 PM »
Cheers Bullsat, I found it before I noticed your responce
Logged

Offline hooley

  • Jr. Member
  • **
  • Posts: 33
Re: SatHawk / Solomend HD PVR 800
« Reply #108 on: July 05, 2010, 06:53:20 PM »
Quote from: ibcus
Cheers Bullsat, I found it before I noticed your responce
Ive a feeling that will lose your CCam settings on the menu. I may be wrong
Logged

Offline ibcus

  • Jr. Member
  • **
  • Posts: 21
Re: SatHawk / Solomend HD PVR 800
« Reply #109 on: July 05, 2010, 07:27:33 PM »
I've flashed it but my kid is watching tv now so I can't look untill later.

I can't understand why the firmware Judasonline talks about needs info from the box and is only for that box, surely it should work in any box?



Edit: You were right hooley, no cccam and only western sats in that image.
I didn't even try it, flashed back to an earlier one.
Logged

Offline satfan

  • Jr. Member
  • **
  • Posts: 4
Re: SatHawk / Solomend HD PVR 800
« Reply #110 on: July 09, 2010, 07:56:59 AM »
How to modify the firmware, replace the font and language files C_10CH13
Logged

Offline ibcus

  • Jr. Member
  • **
  • Posts: 21
Re: SatHawk / Solomend HD PVR 800
« Reply #111 on: July 20, 2010, 05:33:29 PM »
The AC3 with CCcam firmware is here for anyone that's looking for it, works a treat.

You are not allowed to view links. Register or Login
Logged

Offline calisto

  • Jr. Member
  • **
  • Posts: 8
Re: SatHawk / Solomend HD PVR 800
« Reply #112 on: July 22, 2010, 11:54:33 AM »
Hi,

Is there anyway on flashing new firmware onto this box apart from using the USB, as box I have got here just hangs on the LCD saying 'on'?

Thanks
Calisto
Logged

Offline g3o

  • Jr. Member
  • **
  • Posts: 5
Re: SatHawk / Solomend HD PVR 800
« Reply #113 on: July 22, 2010, 12:01:08 PM »
yes there is a serial loader for it attached, you will need a null modem cable, connect it to your pc, start the software and choose the firmware file, as soon as you press next (for it to start looking for the box) turn the receiver on and it should sync and upload the firmware
Logged

Offline calisto

  • Jr. Member
  • **
  • Posts: 8
Re: SatHawk / Solomend HD PVR 800
« Reply #114 on: July 22, 2010, 12:20:09 PM »
HI,

Thanks for your fast reply a025

Have tried to use this loader but when I goto load the firmware, it comes up with this error 'Set stb memory error'

On the settings page am using the following:
Com3 which is the right com port
Bits Rate 115200
Parity Even

& not ticking the Include Bootloader opition

Thanks for your help.

Calisto
Logged

Offline g3o

  • Jr. Member
  • **
  • Posts: 5
Re: SatHawk / Solomend HD PVR 800
« Reply #115 on: July 22, 2010, 12:31:21 PM »
keep the receiver switched off and turn it on immediately after pressing next, the firmware that is included has the bootloader also so you can tick this to include it.
Logged

Offline calisto

  • Jr. Member
  • **
  • Posts: 8
Re: SatHawk / Solomend HD PVR 800
« Reply #116 on: July 22, 2010, 01:52:00 PM »
Thanks M8, have tried what you said but still keeps coming up with same error!!!!
Logged

Offline ibcus

  • Jr. Member
  • **
  • Posts: 21
Re: SatHawk / Solomend HD PVR 800
« Reply #117 on: July 28, 2010, 12:09:13 AM »
That method does work, I did it today on an Openbox (solomend clone)
As he says start program and select firmware, click next.
Turn box on, it should say it is synced but say under that something about restarting the box, DONT.. just leave it, wait and it will continue.
Logged

Offline ibcus

  • Jr. Member
  • **
  • Posts: 21
Re: SatHawk / Solomend HD PVR 800
« Reply #118 on: July 28, 2010, 12:26:25 AM »
Has anyone noticed that some S*y Sports channels make the box reboot then get stuck in a rebooting loop if you try to change channel or access the menu?

Today is the first time I have really played with the box and it drove me nuts, you simply have to unplug your sat feed and you can access the menu and change channel. Very strange.

Here is a dump I took today (using NM_HDS2_CMT_1007120293.abs) with the offending channels removed, 7 groups of favourites but you will probably have to rename them from fav 1, fav 2 etc. For some reason it doesn't save that.

Favorites are:
Entertainment
Movies
HD Channels
Factual
Kids
Music
Sports

Not perfect but it's a start.

This is 28.2e Only.
Logged

Offline calisto

  • Jr. Member
  • **
  • Posts: 8
Re: SatHawk / Solomend HD PVR 800
« Reply #119 on: July 28, 2010, 03:12:56 PM »
Quote from: ibcus
That method does work, I did it today on an Openbox (solomend clone)
As he says start program and select firmware, click next.
Turn box on, it should say it is synced but say under that something about restarting the box, DONT.. just leave it, wait and it will continue.

It might have worked on your box m8 but it has not on mine, it does not say it has synced with box, just this error message 'Set stb memory error'

Thanks anway
Logged
Pages: 1 ... 6 7 [8] 9 10 ... 12   Go Up
« previous next »